Hi all,

does anyone know where I could get an aftermarket rebuild kit to suit
a kehein carb, off a 92 XR250? I've priced a genuine Honda one... 50
bucks just for the gaskets!

Im from Albury if that helps...

Thanks,

Ben

On 3/9/03 7:04 PM, in article
(E-Mail Removed), "Macgyver"
<(E-Mail Removed)> decided to come out from under the bed and slurred:

> Hi all,
>
> does anyone know where I could get an aftermarket rebuild kit to suit
> a kehein carb, off a 92 XR250? I've priced a genuine Honda one... 50
> bucks just for the gaskets!
>
> Im from Albury if that helps...
>
> Thanks,
>
> Ben
Ahhh

Been shopping at Online?

Go over to Wodonga to the car carby place on High street and get them to
help you.

Hammo

Hamish Alker-Jones wrote:
> On 3/9/03 7:04 PM, in article
> (E-Mail Removed), "Macgyver"
> <(E-Mail Removed)> decided to come out from under the bed and slurred:
>
>
>>Hi all,
>>
>>does anyone know where I could get an aftermarket rebuild kit to suit
>>a kehein carb, off a 92 XR250? I've priced a genuine Honda one... 50
>>bucks just for the gaskets!
>>
>>Im from Albury if that helps...
>>
>>Thanks,
>>
>>Ben
>
> Ahhh
>
> Been shopping at Online?
>
> Go over to Wodonga to the car carby place on High street and get them to
> help you.
>
> Hammo

Huh? What happened to splitting the cases?

--
Pete ¨...with a name like his it should be **** easy to make parts from
the empties!¨
Fat Black Harley (Road Toad)

Hamish Alker-Jones <(E-Mail Removed)> wrote in message news:<BB7C16DD.25270%(E-Mail Removed)>...
> On 3/9/03 7:04 PM, in article
> (E-Mail Removed), "Macgyver"
> <(E-Mail Removed)> decided to come out from under the bed and slurred:
>
> > Hi all,
> >
> > does anyone know where I could get an aftermarket rebuild kit to suit
> > a kehein carb, off a 92 XR250? I've priced a genuine Honda one... 50
> > bucks just for the gaskets!
> >
> > Im from Albury if that helps...
> >
> > Thanks,
> >
> > Ben
> Ahhh
>
> Been shopping at Online?
>
> Go over to Wodonga to the car carby place on High street and get them to
> help you.
>
> Hammo


ah didnt think of a car carby place! Are you thinking of jacka carb?
I think they closed down years ago didnt they? Probably a good
thing.. they wanted to rebuild my carb to fix its idling problem..
turned out to be a $10 relay.

Where abouts are you from?

Thanks for the advice

Ben

On 4/9/03 11:25 AM, in article
(E-Mail Removed), "Macgyver"
<(E-Mail Removed)> decided to come out from under the bed and slurred:

> Hamish Alker-Jones <(E-Mail Removed)> wrote in message
> news:<BB7C16DD.25270%(E-Mail Removed)>...
>> On 3/9/03 7:04 PM, in article
>> (E-Mail Removed), "Macgyver"
>> <(E-Mail Removed)> decided to come out from under the bed and slurred:
>>
>>> Hi all,
>>>
>>> does anyone know where I could get an aftermarket rebuild kit to suit
>>> a kehein carb, off a 92 XR250? I've priced a genuine Honda one... 50
>>> bucks just for the gaskets!
>>>
>>> Im from Albury if that helps...
>>>
>>> Thanks,
>>>
>>> Ben
>> Ahhh
>>
>> Been shopping at Online?
>>
>> Go over to Wodonga to the car carby place on High street and get them to
>> help you.
>>
>> Hammo
>
>
> ah didnt think of a car carby place! Are you thinking of jacka carb?
> I think they closed down years ago didnt they? Probably a good
> thing.. they wanted to rebuild my carb to fix its idling problem..
> turned out to be a $10 relay.
>
> Where abouts are you from?
>
> Thanks for the advice
>
> Ben

I've never had any work done by them, just purchased parts from them. Found
them to be reasonably helpful. If they have gone, I'm at a loss to
recommend the next part of call. Car places maybe, but unless they
specialise in carby bits, you be paying more than you should anyway.

Try Toptune out in Stabbington, er Lavington. See what Allan can do.

I grew up in Albury.

Cheers

Hammo

looks at bottom of Olive St
Theres where I was when I was at RMIHE

:-)

Daron
"Hamish Alker-Jones" <(E-Mail Removed)> wrote in message
news:BB7CD75A.25328%(E-Mail Removed)...
> On 4/9/03 11:25 AM, in article
> (E-Mail Removed), "Macgyver"
> <(E-Mail Removed)> decided to come out from under the bed and slurred:
>
> > Hamish Alker-Jones <(E-Mail Removed)> wrote in message
> > news:<BB7C16DD.25270%(E-Mail Removed)>...
> >> On 3/9/03 7:04 PM, in article
> >> (E-Mail Removed), "Macgyver"
> >> <(E-Mail Removed)> decided to come out from under the bed and
slurred:
> >>
> >>> Hi all,
> >>>
> >>> does anyone know where I could get an aftermarket rebuild kit to suit
> >>> a kehein carb, off a 92 XR250? I've priced a genuine Honda one... 50
> >>> bucks just for the gaskets!
> >>>
> >>> Im from Albury if that helps...
> >>>
> >>> Thanks,
> >>>
> >>> Ben
> >> Ahhh
> >>
> >> Been shopping at Online?
> >>
> >> Go over to Wodonga to the car carby place on High street and get them
to
> >> help you.
> >>
> >> Hammo
> >
> >
> > ah didnt think of a car carby place! Are you thinking of jacka carb?
> > I think they closed down years ago didnt they? Probably a good
> > thing.. they wanted to rebuild my carb to fix its idling problem..
> > turned out to be a $10 relay.
> >
> > Where abouts are you from?
> >
> > Thanks for the advice
> >
> > Ben
>
> I've never had any work done by them, just purchased parts from them.
Found
> them to be reasonably helpful. If they have gone, I'm at a loss to
> recommend the next part of call. Car places maybe, but unless they
> specialise in carby bits, you be paying more than you should anyway.
>
> Try Toptune out in Stabbington, er Lavington. See what Allan can do.
>
> I grew up in Albury.
>
> Cheers
>
> Hammo
>

On 4/9/03 12:43 PM, in article bj68ss$i0t$(E-Mail Removed), "Fwoar"
<(E-Mail Removed)> decided to come out from under the bed and slurred:

> looks at bottom of Olive St
> Theres where I was when I was at RMIHE
>
> :-)
>
> Daron

RMIHE?

Riverina Murray Institue of Higher Education
Before Charles Sturt

Student Number
8911111
:-)

Daron

"Hamish Alker-Jones" <(E-Mail Removed)> wrote in message
news:BB7D016D.2535C%(E-Mail Removed)...
> On 4/9/03 12:43 PM, in article bj68ss$i0t$(E-Mail Removed), "Fwoar"
> <(E-Mail Removed)> decided to come out from under the bed and slurred:
>
> > looks at bottom of Olive St
> > Theres where I was when I was at RMIHE
> >
> > :-)
> >
> > Daron
>
> RMIHE?
>
>

Hamish Alker-Jones <(E-Mail Removed)> wrote in message news:<BB7D016D.2535C%(E-Mail Removed)>...
> On 4/9/03 12:43 PM, in article bj68ss$i0t$(E-Mail Removed), "Fwoar"
> <(E-Mail Removed)> decided to come out from under the bed and slurred:
>
> > looks at bottom of Olive St
> > Theres where I was when I was at RMIHE
> >
> > :-)
> >
> > Daron
>
> RMIHE?

ah didnt even think of toptune for parts! I just had Allen do my
engine... top bloke and very reasonable on price,

thanks for the info!

Ben