CX500 Eurosport.... Mine is in need of some new headstock bearings. Does
anyone know a source for these in the UK ?
Any help would be much appreciated.
l

Minamoto <(E-Mail Removed)> spewed forth the following...

> CX500 Eurosport.... Mine is in need of some new headstock bearings. Does
> anyone know a source for these in the UK ?
> Any help would be much appreciated.
> l

David Silver ( http://www.davidsilverspares.co.uk ) list a set of tapered
roller bearings for the Eurosprot at the princely sum of £23.

Look under the "pattern parts/CX500 Euro" section.

HTH

--
Loz H
~ Hairy, Ugly and Fat ~
CB550F CB200 CX500

Loz H wrote:
> Minamoto <(E-Mail Removed)> spewed forth the following...
>
> > CX500 Eurosport.... Mine is in need of some new headstock bearings.
Does
> > anyone know a source for these in the UK ?
> > Any help would be much appreciated.
> > l
>
> David Silver ( http://www.davidsilverspares.co.uk ) list a set of
tapered
> roller bearings for the Eurosprot at the princely sum of £23.
>
> Look under the "pattern parts/CX500 Euro" section.
>
> HTH
>
Cheaper than the inferior OE cup & cone bearings, too.

On or around 23 May 2005 03:19:38 -0700, "TOG@Toil
(E-Mail Removed)" <(E-Mail Removed)> enlightened
us thusly:

>Loz H wrote:
>> Minamoto <(E-Mail Removed)> spewed forth the following...
>>
>> > CX500 Eurosport.... Mine is in need of some new headstock bearings.
>Does
>> > anyone know a source for these in the UK ?
>> > Any help would be much appreciated.
>> > l
>>
>> David Silver ( http://www.davidsilverspares.co.uk ) list a set of
>tapered
>> roller bearings for the Eurosprot at the princely sum of £23.
>>
>> Look under the "pattern parts/CX500 Euro" section.
>>
>> HTH
>>
>Cheaper than the inferior OE cup & cone bearings, too.

and noticeably better. Decent bikes come with taper rollers in the first
place :-)

--
Austin Shackles. www.ddol-las.fsnet.co.uk my opinions are just that
"Quos deus vult perdere, prius dementat" Euripedes, quoted in
Boswell's "Johnson".

"Austin Shackles" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> On or around 23 May 2005 03:19:38 -0700, "TOG@Toil

>>Cheaper than the inferior OE cup & cone bearings, too.
>
> and noticeably better. Decent bikes come with taper rollers in the
> first
> place :-)

Rather a surprise to find that the Gixxer has ball races running the
bearings in a captive cage.

'Hog

MUCH obliged, folks !
al



"'Hog" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>
> "Austin Shackles" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> On or around 23 May 2005 03:19:38 -0700, "TOG@Toil
>
>>>Cheaper than the inferior OE cup & cone bearings, too.
>>
>> and noticeably better. Decent bikes come with taper rollers in the first
>> place :-)
>
> Rather a surprise to find that the Gixxer has ball races running the
> bearings in a captive cage.
>
> 'Hog
>