2010 HD 883 IRON $13,350 RIDEAWAY

Discussion in 'Australian Motorcycles' started by PaulpULVITZKA, Dec 15, 2009.

  1. I THINK ITS A BARGAIN

    YOU WOULD H A V E TO BE A TOTAL FUCKWIT TO BUY A OVERPRICED UNDERDONE
    HAHAHAHONDA SHITBOX!
     
    PaulpULVITZKA, Dec 15, 2009
    #1
    1. Advertisements

  2. And you can pick one up in the USA for $7995
     
    George W Frost, Dec 15, 2009
    #2
    1. Advertisements

  3. PaulpULVITZKA

    hippo Guest

    That's fine, but you still have to fork out for blades and a catcher :)
     
    hippo, Dec 16, 2009
    #3
  4. PaulpULVITZKA

    theo Guest

    By the time you add 10% for the exchange rate, 10% for GST, freight,
    your return air fare, and live in the USA for 12 months to enable you
    to bring it back, you'll have a bike with no Oz compliance, red
    indicator lenses, no resale value, and you won't get much change from
    $A13,350. And you'll have to convert it to Right Hand Drive.

    Theo
     
    theo, Dec 16, 2009
    #4
  5. PaulpULVITZKA

    hippo Guest

    Not to mention the fuel tank holding US gallons rather than litres....
     
    hippo, Dec 16, 2009
    #5
  6. By the time you add 10% for the exchange rate, 10% for GST, freight,
    your return air fare, and live in the USA for 12 months to enable you
    to bring it back, you'll have a bike with no Oz compliance, red
    indicator lenses, no resale value, and you won't get much change from
    $A13,350. And you'll have to convert it to Right Hand Drive.

    Theo

    ********************************

    Bugger,
    I had forgotten about the right hand drive being the most expensive to
    convert
     
    George W Frost, Dec 16, 2009
    #6
  7. PaulpULVITZKA

    BT Humble Guest

    They use antifreeze in their blinker fluid over there, too.


    BTH
     
    BT Humble, Dec 18, 2009
    #7
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.