Boring on-topic question

Discussion in 'UK Motorcycles' started by Jérémy, Sep 16, 2010.

  1. Jérémy

    Jérémy Guest

    How do I clean the matt black plastic bits of my bike? They acquire a
    whitish look, which from its distribution I suspect may partly be caused by
    the polish I put on the painted parts. On my last bike I tried a plastic
    polish, which made it worse. Any ideas?
     
    Jérémy, Sep 16, 2010
    #1
    1. Advertisements

  2. Jérémy

    ogden Guest

    Yeah. Don't bother. Problem solved.
     
    ogden, Sep 16, 2010
    #2
    1. Advertisements

  3. Jérémy

    TOG@Toil Guest

    Silkolene Pro-Prep or Back To Black. Both in aerosol form. There's
    some car 'black bumper spray' which might work just as well, too.
     
    TOG@Toil, Sep 16, 2010
    #3
  4. Jérémy

    crn Guest

    FWIW, I brush it with boot polish. Other folks are less clumsy with
    applying polish in the first place.
     
    crn, Sep 16, 2010
    #4
  5. Jérémy

    darsy Guest

    he *might* have meant something like Renapur which would work, rather
    than the "shoe blackening" stuff you're probably thinking of.

    Then again, no, he's a ****.
     
    darsy, Sep 16, 2010
    #5
  6. Jérémy

    Catman Guest

    Amor-all is another one that may be worth trying.

    If it *is* something that's been mis-applied, then perhaps some meths or
    similar might clean it off. However, if the plastic is just fading,
    then you'll need some kind of spray for a permanent fix.

    This stuff is, IME the dogs

    http://www.frost.co.uk/item_Detail.asp?productID=8152


    --
    Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3
    Tyger, Tyger Burning Bright (Remove rust to reply)
    116 Giulietta 3.0l Sprint 1.7 GTV TS GT 3.2 V6
    Triumph Sprint ST 1050: It's blue, see.
    www.cuore-sportivo.co.uk
     
    Catman, Sep 16, 2010
    #6
  7. Jérémy

    Catman Guest

    Only briefly IME.


    --
    Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3
    Tyger, Tyger Burning Bright (Remove rust to reply)
    116 Giulietta 3.0l Sprint 1.7 GTV TS GT 3.2 V6
    Triumph Sprint ST 1050: It's blue, see.
    www.cuore-sportivo.co.uk
     
    Catman, Sep 16, 2010
    #7
  8. Jérémy

    Catman Guest

    Oh aye. But again, only a temporary fix IME.

    --
    Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3
    Tyger, Tyger Burning Bright (Remove rust to reply)
    116 Giulietta 3.0l Sprint 1.7 GTV TS GT 3.2 V6
    Triumph Sprint ST 1050: It's blue, see.
    www.cuore-sportivo.co.uk
     
    Catman, Sep 16, 2010
    #8
  9. Jérémy

    Beav Guest

    One and it doesn't include any products that all eventually dry out like the
    original plastic did. So....

    Hit the plastic with a hairdryer. Go carefully and be amazed at the results.
    Keep the hairdryer moving and you'll see the white disappear and the black
    take its rightful place.

    If you know the Vauxhall Corsa, you'll know that the wheel arch plastics
    *all* go white and it's because the oil in the plastic evaporates/dries
    up/whatever the **** it does, but the heat from the dryer brings it all back
    to the surface leaving it looking like brand new.

    You don't even have to rub.
     
    Beav, Sep 16, 2010
    #9
  10. Jérémy

    Beav Guest

    He's Burt Monroe in disguise.
     
    Beav, Sep 16, 2010
    #10
  11. Jérémy

    Beav Guest

    See my other post for a permanent fix.
     
    Beav, Sep 16, 2010
    #11
  12. Jérémy

    Catman Guest

    Indeed. Makes perfect sense and is noted for future use.

    --
    Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3
    Tyger, Tyger Burning Bright (Remove rust to reply)
    116 Giulietta 3.0l Sprint 1.7 GTV TS GT 3.2 V6
    Triumph Sprint ST 1050: It's blue, see.
    www.cuore-sportivo.co.uk
     
    Catman, Sep 16, 2010
    #12
  13. Jérémy

    darsy Guest

    long enough to convince someone to buy it.

    Some sort of silicone polish is the way to go, really.
     
    darsy, Sep 16, 2010
    #13
  14. Jérémy

    Catman Guest

    cf. Armor-All


    --
    Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3
    Tyger, Tyger Burning Bright (Remove rust to reply)
    116 Giulietta 3.0l Sprint 1.7 GTV TS GT 3.2 V6
    Triumph Sprint ST 1050: It's blue, see.
    www.cuore-sportivo.co.uk
     
    Catman, Sep 16, 2010
    #14
  15. Jérémy

    Gavin Guest

    Gavin, Sep 16, 2010
    #15
  16. Jérémy

    Catman Guest

    Huh? I think I was whooshed.

    --
    Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3
    Tyger, Tyger Burning Bright (Remove rust to reply)
    116 Giulietta 3.0l Sprint 1.7 GTV TS GT 3.2 V6
    Triumph Sprint ST 1050: It's blue, see.
    www.cuore-sportivo.co.uk
     
    Catman, Sep 16, 2010
    #16
  17. Jérémy

    SteveH Guest

    Baby oil.

    That's what I used on the VFR.

    The cheap Tesco Value stuff seems to work as well as anything.

    But, depending on what else you buy at the same time, you may attract
    some odd looks at the checkouts.
     
    SteveH, Sep 16, 2010
    #17
  18. Jérémy

    TOG@Toil Guest

    A mate once bought a Kawasaki Z200. After a couple of days' riding, he
    noticed the seat was changing colour from black to brown and his jeans
    were changing from blue to black.

    Some genius (presumably the dealer who sold him the thing) had re-
    covered the seat with some old rubble bag plastic, or similar, and
    applied black boot polish to make it look good (which it did).
     
    TOG@Toil, Sep 16, 2010
    #18
  19. Jérémy

    Nige Guest

    Smooth peanut butter or baby oil works ace.

    --


    Nige,

    'Candygram for Mongo'

    R1
     
    Nige, Sep 16, 2010
    #19
  20. Jérémy

    crn Guest

    OK, bigmouth.
    Now tell us what the problem is. It works just fine.
    FWIW the liquid "instant" boot polishes with a little spong on top
    work even better.
    Try it, you might be surprised.
     
    crn, Sep 16, 2010
    #20
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.