CL350 rear sprocket stuck

Discussion in 'Motorcycle Technical Discussion' started by gabe2004, May 18, 2007.

  1. gabe2004

    gabe2004 Guest

    I'm trying to replace the rear sprocket on my '72 cl350 but the
    sprocket just won't budge. I removed the 4 nuts and the large circlip
    and washer but the sprocket seems to be stuck to the four bolts. It
    won't budge. According to the shop manual, once the nuts and circlip
    are removed, the sprocket should just slide off. Any suggestions?
    Thanks, Gabe.
     
    gabe2004, May 18, 2007
    #1

    1. Advertisements

  2. gabe2004

    The Older Gentleman Guest

    Heat and, as B12 suggests, penetrating oil. And a hammer.
     
    The Older Gentleman, May 18, 2007
    #2

    1. Advertisements

  3. gabe2004

    gabe2004 Guest

    Thanks so much. Penetrating oil and a hammer did it!
     
    gabe2004, May 20, 2007
    #3

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CL350 Keihin CV Carb questions

  2. 1969 Honda CL350 Doesn't Go Above 40mph

  3. cl350 spark plugs

  4. cl350 recomended tire pressure?

  5. honda cl350 flat spot issue

  6. Rear disk is stuck

  7. My rear sprocket...

  8. 1974 gt380 rear sprocket

Loading...