Dead Mito

Discussion in 'Australian Motorcycles' started by Biggus The Greatest......, Aug 7, 2003.

  1. I bet this is the one from here the dude fucked.

    http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=2426640325&category=32625

    CAGIVA MITO 125 1999 Needs Engine Work

    1999 CAGIVA MITO 125cc Two Stroke Sports Bike
    - 26,000kms
    Needs Engine Repairs.


    The rest of this sleek and nimble sports machine is in immaculate
    condition. Almost new tyres and brake pads.

    The engine has been dismantled by a motorcycle mechanic but I could
    not afford the total cost of the repairs.

    This bike would suit a mechanic or bike enthusiast.

    All parts are boxed and parts are placed where they belong to be put
    back together.

    This bike is so much fun to ride!!! They handle like a dream and pack
    a bit power. And they look HOT!! see picture below.
    This bike in running order is valued at $5000.00
     
    Biggus The Greatest......, Aug 7, 2003
    #1
    1. Advertisements

  2. Biggus The Greatest......

    Johnnie5 Guest

    what a load of BS

    it must have blown up big time

    why else would he sell it at $2200 below market value

    buyer beware
     
    Johnnie5, Aug 7, 2003
    #2
    1. Advertisements

  3. Agree..

    Cant imagine what it could be, unless its crank barrel head the lot...
    then it could be a few grand in parts, and a young fella wouldnt have
    that much in the bank.. **** Im 36 and dont have $36 in the bank.. :(
     
    Biggus The Greatest......, Aug 7, 2003
    #3
  4. Im pretty sure mitoboy is in Perth but bike is being sold on the Gold
    Coast. Sent for repairs??
     
    Theo Fontaine, Aug 7, 2003
    #4
  5. Biggus The Greatest......

    Nev.. Guest

    mitoboy's bike doesn't have "Almost new tyres" either unless you can retread
    flatspots.

    Nev..
    '02 CBR1100XX #2
     
    Nev.., Aug 7, 2003
    #5
  6. Biggus The Greatest......

    sharkey Guest

    CAGIVA MITO 125 1999 Needs Engine Work [...]
    That's some meaning of 'running order' I was previously unaware of.

    Bikes in pieces with dead motors are worth $1000, tops, as parts
    bikes.

    PS: **** off, spammer bitch.

    -----sharks
     
    sharkey, Aug 7, 2003
    #6
  7. lol!

    $3.50 and a kick in the nuts, but you'll have to deliver it to
    Sydney!

    ;-)

    big
     
    Iain Chalmers, Aug 8, 2003
    #7
  8. Biggus The Greatest......

    Mitoboy Guest

    Sorry all but my bike is a 2000 model and will be back on the road next
    week.

    This bike has been dropped coz it got no stickers on the fairings... so well
    i rekon ne way from what the owner says.
    i bought mine a 2000 model with 7000kms on the clock for $4500 but at the
    time it had a blown head gasket... and had been cooked b4 hand. so i picked
    up the bike for like $1500 less that if it would have been in pristine
    condition.

    personally i rekon he got a quote from Paul Feeney group for parts and shat
    himself when he found out how biga cockheads they are!!! I got a quote for a
    barrel and piston kit and they wanted more than what i paid for a polini big
    bore kit!!!

    To be honest he probably just had a cold seizure (like me) but managed to
    fuk up the crank etc.
    The dumb ass musta not done rebuilds when they were needed coz it has 26K on
    the clock.... u cant skimp on a 2 stroke!!!
    Personally i would be glad to give the guy $3.50 and 2 kicks in the nuts
    (with steal caps)....coz i want spares at bargin prices!!!!
     
    Mitoboy, Aug 8, 2003
    #8
  9. Biggus The Greatest......

    Mitoboy Guest

    mitoboy's bike doesn't have "Almost new tyres" either unless you can
    retread
    If its Any constelation the rear Pads r quite new. but that rear tyre of
    mine wore down thru the wear indicator far below the bottom of the tread...
    but the tyre was pretty shagged at the time neway. actually the flat spot
    goues around half of the tyre it musta spun very slowly while sliding!
     
    Mitoboy, Aug 8, 2003
    #9
  10. Biggus The Greatest......

    Mitoboy Guest

    I wish it was worn that little!!! :)
     
    Mitoboy, Aug 8, 2003
    #10
  11. Biggus The Greatest......

    Boxer Guest

    Throw away the motor and drop in a WR450 Yamaha Single.

    Boxer
     
    Boxer, Aug 8, 2003
    #11
  12. I got a quote for abarrel and piston kit and they wanted more than what i paid for a polini big bore kit!!!


    Thats normal for aftermarket to be cheaper.
     
    Biggus The Greatest......, Aug 8, 2003
    #12
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.