This weekend, I decided to investigate the creaking noise coming from the front of the bike and it turned out that the small aftermarket screen was rubbing against the instruments. Also the bolts which were holding the screen to the headlight were too short and the nuts had come off inside the headlight. As the screen also had a small crack, I decided to remove it and refit the headlight properly as I REALLY didn't want it to fall out while I was moving. Problem is that now, at speeds above the national limit, it's a bit windy so I'd like to fit a screen which actually fits. Suggestions please [1] for a replacement screen [1] The following can be considered superfluous:- Angle Grinder Go slower Gixer Thou