GSX-R Handlebar Conversion

hi all

i'm going to convert my gsx-r 600 k4 from clip-ons to a raise
Handlebar, i've been watching for some conversion kit's and they are
expensive, since i only need the top yoke.

two question's

Were can i buy a top yoke, ( lsl only sell the kit with all the stuff
needed ) ...

or since i have the possibility to make one top yoke, where can i find
the measures of the oem top yoke, CAD drawing or pdf file or other.

Thanks
Jaime

 

ebay.

Go to your local Suzuki dealer with a tape measure and see if
a Bandit yoke will fit. Then change your pseudonym to Apehangerman.

 

Or a breaker. Must be loads of straight top yokes attached to bent
forks, hanging around.

Hog is your man for this - he put flat bars on his Gixxer Thou - in
fact, he puts raisers and flat bars on everything.

 

Don't bother with that, find out the width of the forks (I think
they're
50mm iirc) and then find something that has clip-ons with built in
risers
that are also the same size, eg Ducati SS are 50mm and look like this:
http://amsmotors.com/95duc/drbar.jpg

That's give you a nice easy and cheap way to raise the bars if that's
all you need to do.

 

<perk>
Ho Yuss.
www.streetfighterstore.co.uk/gsxr_600/121
ABM conversion was what I used on a GSXR1000. Use a set of raask adjustable
jota bars.

 

thanks for the posts

they gave me new ideas, to work on...

Regards
Jaime
Portugal

 

A man with sense then.


--
Beav

VN 750
Zed 1000
OMF# 19