OT Builders

Discussion in 'UK Motorcycles' started by Tim, Sep 30, 2008.

  1. Rather, the householder's responsibility to pay a spark to re-route
    cables as necessary. Let's face it, all the installation installer
    wants, and is paid, to do is turn up and fill the walls.
    He was caught on the hop with this one, but imo, it's not his fault -
    the walls should have been clear of cables and if not, they should have
    been protected.
    --
    Dave
    GS850x2 XS650 SE6a

    "It's a moron working with power tools.
    How much more suspenseful can you get?"
    - House
     
    Grimly Curmudgeon, Oct 2, 2008
    #21
    1. Advertisements

  2. Tim

    Veggie Dave Guest

    As someone who isn't a spark, how the hell am I supposed to know any of
    this if the 'professional' I employ to do the job doesn't tell me?

    And even if we were all electrical experts who knew we had to check
    every wire in the walls for safety before having insulation fitted, it
    would still be the insulation installers duty to check those precautions
    had been done before commencing work.

    --
    Veggie Dave
    http://www.iq18films.co.uk

    "To assert that the earth revolves around the sun is as erroneous as to claim
    that Jesus was not born of a virgin." Cardinal Bellarmine
     
    Veggie Dave, Oct 2, 2008
    #22
    1. Advertisements

  3. It's your property, it's up to you to know. To a certain extent the
    insulation intaller can be reasonably expected to spot a fairly obvious
    problem and draw your attention to it, but it's not his job to fix it.

    That's yours.

    Apart from that, no installation installer has x-ray vision and if he
    damaged a cable that's invisible it's in no way his fault.

    It's your house, your responsibility. Suck it up and get it fixed.
    --
    Dave
    GS850x2 XS650 SE6a

    "It's a moron working with power tools.
    How much more suspenseful can you get?"
    - House
     
    Grimly Curmudgeon, Oct 2, 2008
    #23
  4. Tim

    Veggie Dave Guest

    If there's something that needs to be checked for safety reasons then I
    expect to be told by the 'expert' that I need to do it before they start
    to work.

    It's absolutely normal practise in my work. In fact, I can't think of a
    situation where it wouldn't be.

    --
    Veggie Dave
    http://www.iq18films.co.uk

    "To assert that the earth revolves around the sun is as erroneous as to claim
    that Jesus was not born of a virgin." Cardinal Bellarmine
     
    Veggie Dave, Oct 2, 2008
    #24
  5. What was the item being fed by the cable, out of interest? Was it
    internal?

    Cable in a cavity is utterly bad practice, although not illegal or
    against regs, and the insulation installer had no reason to suspect one
    to be there from what I read.

    And where do you hire the x-ray specs you use in your line of work, for
    I'm sure the insulation installer would like a set. I would too, come to
    that.
    --
    Dave
    GS850x2 XS650 SE6a

    "It's a moron working with power tools.
    How much more suspenseful can you get?"
    - House
     
    Grimly Curmudgeon, Oct 2, 2008
    #25
  6. Tim

    Veggie Dave Guest

    I suggest you actually read what I wrote. If you can find a single
    comment about having x-ray specs I'll suck a pig's cock in Trafalgar
    Square.

    --
    Veggie Dave
    http://www.iq18films.co.uk

    "To assert that the earth revolves around the sun is as erroneous as to claim
    that Jesus was not born of a virgin." Cardinal Bellarmine
     
    Veggie Dave, Oct 2, 2008
    #26
  7. Tim

    Tim Guest

    Porch lights.
    So perhaps the installation installer may have paused for thought and
    bothered to think about how you feed power to the porch.

    Reg? Hmm house is 40 years old so I suspect that any rules were
    different then.

    Someone mentioned the wall filler reacting to the cable. Well then the
    professional insulator chappie would therefore not fill the wall. But he
    did, so obviously he doesn't think it's an issue (or he wants to burn
    down my house).
     
    Tim, Oct 2, 2008
    #27
  8. Tim

    Tim Guest

    That's some promise for a vegetarian too.
     
    Tim, Oct 2, 2008
    #28
  9. 1. If it is, in fact, expanded polystyrene beads.

    2. If he even knows about the problem - surprising how many don't.

    3. If he even gives a shit.

    4. If he knew about the cable.
    --
    Dave
    GS850x2 XS650 SE6a

    "It's a moron working with power tools.
    How much more suspenseful can you get?"
    - House
     
    Grimly Curmudgeon, Oct 2, 2008
    #29
  10. You drew the parallel.
    --
    Dave
    GS850x2 XS650 SE6a

    "It's a moron working with power tools.
    How much more suspenseful can you get?"
    - House
     
    Grimly Curmudgeon, Oct 2, 2008
    #30
  11. Tim

    platypus Guest

    ****'s sake, leave it. Think of the pig.
     
    platypus, Oct 3, 2008
    #31
  12. Tim

    Tim Guest

    1 & 2 , who knows, because I don't.

    3 I bet he didn't.

    4 it seems he didn't.

    I was idly wondering why they don't have some gauge that only allows the
    drill to go as far as a standard brick width, at which point they'd stop
    and have a look before further drilling.
     
    Tim, Oct 3, 2008
    #32
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.