Ping Lozzo

How easy is it to fit one of these?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=220450757142

Will I need any other bits, or is everything attached to the fairing?
I think my Bindit originally had one but not there now.

TIA

 

Piece of piss.

Make sure you get the brackets that locate under the fuel tank, or
you'll have to make your own out of bits of Pip's left over car stereo
fitting brackets.

I fitted mine in about an hour from scratch. Leave the fairing all
bolted together and with the bracket in place. Put the bike on the
centre stand with the front wheel in the straight ahead position. You
simply remove the original headlight/indicators and associated
brackets, leave the wiring as it is and then bolt the fairing complete
into the frame, plug the wiring up to the new headlight and indicators
and cable tie it where needed, then fit the backets under the tank to
the fairing... simple as that.

My bike had aftermarket headlight brackets, so you may need to remove
the top yoke to remove yours from the bike. I paid 60 quid for my
fairing complete on ebay, but I got very lucky.

 

Thanks.

<fires up ezsniper>