That's going to cost...

Discussion in 'UK Motorcycles' started by eric the brave, May 13, 2005.

  1. eric the brave

    eric the brave Guest

    Checked the valve clearances on the ZX9R. Only two inlet valves are OK.
    Just over bottom limit. One of the exhaust valves is 0.01 mm minimum is
    ..22. Do you think it's harmed the valves or after re-shimming [1] it will
    be OK?

    [1] shims are expensive I know.
     
    eric the brave, May 13, 2005
    #1

    1. Advertisements

  2. eric the brave

    The Older Gentleman Guest

    It'll be fine. And the chances are that on a re-shim you can swap
    several shims around anyway.
     
    The Older Gentleman, May 14, 2005
    #2

    1. Advertisements

  3. eric the brave

    eric the brave Guest

    Thats what I thought.
    Hopefully. I thought I'd ask the masses though.
     
    eric the brave, May 14, 2005
    #3
  4. eric the brave

    eric the brave Guest

    could be even cheaper. A mate has a box full of them.
    Thanks, I thought so myself but just wanted to make sure. It's a bastard
    to work on though. The cam shaft cover is one piece. I will have to paint
    the cams with white paint so i can see the timing marks.
     
    eric the brave, May 14, 2005
    #4

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Oh God, this going to cost me

  2. That's it, I' going for a ride

  3. Mens XXL winter and summer jackets going, going ...

  4. That'll cost.

  5. Going, going...

  6. Red Bull Air Race- places going... going...

  7. You see that guy that walks down the street flapping his arms and going "blarg blarg blarg"?

  8. I wonder how much that cost the BBC

Loading...