Tyre tred

Discussion in 'Australian Motorcycles' started by Andy, Dec 16, 2006.

  1. Andy

    Andy Guest

    Before I cop any abuse.. yes im a DFU that cant use goggle.

    The front on my Michelin power pilots tread channels the water to the centre
    of the tyre... sounds wrong to me?? but its on the right way round...
    thoughts????????

    Andy.
     
    Andy, Dec 16, 2006
    #1
    1. Advertisements

  2. Imagine you are at, say, 30-degree angle of lean, cornering. Does it
    make better sense now?
     
    Andrew McKenna, Dec 16, 2006
    #2
    1. Advertisements

  3. Andy

    Andy Guest

    nup.. it still looks like its channeling the water to the cenre of the tyre.

    Andy.
     
    Andy, Dec 17, 2006
    #3
  4. Andy

    Nev.. Guest

    It's not a car, it's a bike. The centre of the tyre pushes water to the
    side, the edge of the tyre pushes water back to the centre, which is
    exactly where you want the water to go. As long as the arrows are
    pointing the right way there is nothing to worry about.

    Nev..
    '04 CBR1100XX
     
    Nev.., Dec 17, 2006
    #4
  5. Andy

    Andy Guest

    Yeah kinda. On a lean angle it would channel the water across the tyre, as
    the centre would not be in contact with the road.
    Its just the rear is as you would expect, channelling the water to the
    outside of the tyre

    Andy.
     
    Andy, Dec 17, 2006
    #5
  6.  
    Andrew McKenna, Dec 17, 2006
    #6
  7. Andy

    Nev.. Guest

     
    Nev.., Dec 17, 2006
    #7
  8. Andy

    Hammo Guest

    Is that the reason that the majority of rockets don't require tyres?

    Hammo
     
    Hammo, Dec 17, 2006
    #8
  9. Andy

    Andy Guest

    It's not rocket science. The tyre only has a small contact patch and
    That was what I was figuring. just looked wrong when I looked at the tyre..
    my first though was it was on the wrong way around.

    Andy.
     
    Andy, Dec 17, 2006
    #9
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.