having trouble with my cg125 it starts and runs fine---without the battery connected, or any wires connected, even the ignition switch have to stall it to stop it what do i need to connect up so i've got basic stopping and starting working using the ignition switch???? my old ignition switch which was drilled out coz of a lost key has 5 wires coming out of it, 1 green 1 red 2 black and 1 black/white the new switch i got only has 4 wires , red , green, black, black/white any ideas???
I've got a haynes manual on the way... really need the wiring diagram.... wish I knew more about electrics, i get totally confused when talking about earthing things and checking fuses...lol
The convention on this group is to bottom post , if you ignore the convention some of the other posters will bite you steve
The Older Gentleman wrote There are some things brother that are beyond simple faith. It is possible that this time even the gods will be unable to help.
Don't panic. If you can get a scan of the Haynes wiring diagram to me, and have a multimeter (ohmmeter, continuity tester) to test the new switch, we should be able to walk it through together. Maybe... ;-) Oh, and please don't top-post here!
He's got it. I do believe he's got it! -- Ivan Reid, Electronic & Computer Engineering, ___ CMS Collaboration, Brunel University. Ivan.Reid@[brunel.ac.uk|cern.ch] Room 40-1-B12, CERN GSX600F, RG250WD "You Porsche. Me pass!" DoD #484 JKLO#003, 005 WP7# 3000 LC Unit #2368 (tinlc) UKMC#00009 BOTAFOT#16 UKRMMA#7 (Hon) KotPT -- "for stupidity above and beyond the call of duty".
